bradders Posted April 28, 2015 Report Share Posted April 28, 2015 Delivered today to Bisley Fed up with missing out on the wonderful CSR matches, Darren asked me to supply him with a rifle so he can come and play with his pal Simon W Here it is 18" Border Mid weight SPR profile with .223 AR Match chamber Billety billet upper and double whipped billet charging handle, with an extra dose of billet Not only are these made from billets, they are made from "SOLID BILLETS" Lowe receiver is a forged one.....but it's stamped from a BILLET! Bradley Arms Evo 12" handguard, finished in Cerakote Magpul FDE to match the UBR and grip....and 4x mags Geissele SD-C 2 stage trigger Tier One/Third Eye/Evo Tac Brake and Spartan QD mod, for those days on the farm ADM 2" Recon mount Vortex Razor 1-6x24 scope (note the complete lack of gizmo to fit a bipod = real man!) The ranges were shut for maintenance, so we settled on the zero range for set-up The happy new owner Link to comment Share on other sites More sharing options...
baldie Posted April 28, 2015 Report Share Posted April 28, 2015 Very nice. Link to comment Share on other sites More sharing options...
MrCetrizine Posted April 28, 2015 Report Share Posted April 28, 2015 Mark, are you making those handguards? They are pretty. What's the internal dimension and do you do them with lower rails for poofs? I was thinking of a 15" handguard on my 12" barrel so it covers half my Mod which would make it prettier and naturally shoot better but it would need a 1.8" internal dimension. Link to comment Share on other sites More sharing options...
chaz Posted April 28, 2015 Report Share Posted April 28, 2015 Very nice! Link to comment Share on other sites More sharing options...
JDBenelliM1 Posted April 28, 2015 Report Share Posted April 28, 2015 Great looking rifle Mark! The UBR is growing on me I fear a .223 variation will be submitted in the not too distant future. This summers going to be awesome Link to comment Share on other sites More sharing options...
bradders Posted April 28, 2015 Author Report Share Posted April 28, 2015 Mark, are you making those handguards? They are pretty. What's the internal dimension and do you do them with lower rails for poofs? I was thinking of a 15" handguard on my 12" barrel so it covers half my Mod which would make it prettier and naturally shoot better but it would need a 1.8" internal dimension. They make them for me ID is just under 40mm, a Jet Z won't fit, but the IMD could be skimmed The hand guards come with 1x4" and 2x2" screw on Piccadilly rails, but the backing strips would encroach further on ID Link to comment Share on other sites More sharing options...
MrCetrizine Posted April 28, 2015 Report Share Posted April 28, 2015 Hmm, I don't think it would fit my One Less Charlie then. Shame as is would have looked very pretty which is all that matters. The only ones I've seen that are big enough are these which have a good name (you should sue) but are ugly quad rails. Link to comment Share on other sites More sharing options...
bradders Posted April 28, 2015 Author Report Share Posted April 28, 2015 Hmm, I don't think it would fit my One Less Charlie then. Shame as is would have looked very pretty which is all that matters. The only ones I've seen that are big enough are these which have a good name (you should sue) but are ugly quad rails. Not bad in the flesh but a bit too big in the hand. They also don't fit all upper receivers Link to comment Share on other sites More sharing options...
Offroad Gary Posted April 29, 2015 Report Share Posted April 29, 2015 Nice. Did you test it with mod on and off? Was there much poi shift?? Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.