swagger700 Posted January 28, 2015 Report Share Posted January 28, 2015 Hi, I'm after fitting a drone to a short action remington just wondered what people have mounted drone with to get round eye relief and bolt clearance ?? Many thanks Jon Link to comment Share on other sites More sharing options...
Blaser lrs2 Posted January 28, 2015 Report Share Posted January 28, 2015 Hi can you stick up a picture I have mine fitted to a tikka with picatinny rail no problems Link to comment Share on other sites More sharing options...
swagger700 Posted January 28, 2015 Author Report Share Posted January 28, 2015 I've offered it up with a farrell rail i have and bolt clearance is tight and way to far forward i know third eye do extended rails cos spoke to Craig other day was wondering what everyone else is using Jon Link to comment Share on other sites More sharing options...
visiter1 Posted January 28, 2015 Report Share Posted January 28, 2015 i got an extenion rail fro night ision gear does both jobs on y cz Link to comment Share on other sites More sharing options...
fizzbangwhallop Posted January 28, 2015 Report Share Posted January 28, 2015 Baldie is your man....... http://ukvarminting.com/forums/topic/25581-new-range-of-rails/ I know you need a 10mm high rail on Tikka 595's and T3's but haven't a clue on the Remi's. I use a reversed EGW rail (from Kinneysshootingsupplies.com) to get the eye relief but had to get some longer screws from EGW direct (Free! ) as they countersink the rail holes to various depths to allow the same length screw to be used for all 4..... turning it round scuppers that. Cheers Fizz Link to comment Share on other sites More sharing options...
rover Posted February 20, 2015 Report Share Posted February 20, 2015 Hi Waiting on new drone pro 10 to come out, spoke to carl the other day mounting system has extra holes on it so it can be moved further back, can't wait to get my hands on it. Jim Link to comment Share on other sites More sharing options...
Rammer223 Posted February 20, 2015 Report Share Posted February 20, 2015 I am fancying one and also run a remmington so would like to know how you go on regards fitting etc keep us posted regards lee Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.