snow white Posted January 21, 2015 Report Share Posted January 21, 2015 Hi will be getting new rifle shortly can I use my old brass to make up some rounds got all the gear you need.if I resize the once fired brass I have will it be ok to use.thanks for looking. Link to comment Share on other sites More sharing options...
The Gun Pimp Posted January 21, 2015 Report Share Posted January 21, 2015 New rifle - new brass! The golden rule.............. Link to comment Share on other sites More sharing options...
gbal Posted January 21, 2015 Report Share Posted January 21, 2015 Best practice is "new rifle new brass",but if you full length resize (twice does no harm) a few used brass and carefully check they chamber and eject,then you can probably get away with using what you have-at least for that headstamped lot of brass.Chambers can/do differ just a little even in factory chambers,so check first.Do not force unloaded brass into chamber,or you may end up with stuck case,to be knocked out.If brass chambers easliy,very carefully check chambering with a loaded round or two.DO NOT FORCE.If it sticks,you have a problem....DO NOT TRY TO KNOCK OUT. Link to comment Share on other sites More sharing options...
.jpg.0972b4e2bdf0b5a4109eb96f2b1b62ad.jpg)
(200x135).jpg.0fd0a94f065c6cb243fdff1b40e0819a.jpg)
Recommended Posts
Archived
This topic is now archived and is closed to further replies.