visiter1 Posted December 27, 2014 Report Share Posted December 27, 2014 may have been asked before but does ir light get distorted on a stainless steall barreled gun? Link to comment Share on other sites More sharing options...
pork chop Posted December 27, 2014 Report Share Posted December 27, 2014 not noticed a problem myself ,depending which rifle i use that's with a stainless mod too.torch is high and well back though Link to comment Share on other sites More sharing options...
JB1 Posted December 29, 2014 Report Share Posted December 29, 2014 No problems with mine. Link to comment Share on other sites More sharing options...
Montey Posted December 29, 2014 Report Share Posted December 29, 2014 Not had a problem on mine using Drone and nm800 Link to comment Share on other sites More sharing options...
visiter1 Posted December 30, 2014 Author Report Share Posted December 30, 2014 I think an adjustable mount will solve the prob thanks lads Link to comment Share on other sites More sharing options...
ergid Posted December 30, 2014 Report Share Posted December 30, 2014 hi use a sun shade on your scope and place your IR torch as far back as you can , you could also use a sleeve over your barrel . Link to comment Share on other sites More sharing options...
Rammer223 Posted December 31, 2014 Report Share Posted December 31, 2014 I had an issue when I built screen type add on ,had blowm showing on the bottom of the screen as said adjustable mount as far back as you can get It i also made a sleeve out of an old pair camo trousers which sorted the problem ,it all worked well but didn't like head position etc so sold it on Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.