AndyCM Posted May 6, 2008 Report Share Posted May 6, 2008 I have a new 7mm-08 rifle coming and tried my first lapua brass recently (in .243). as lapua don't do 7mm-08 can I neck down from . 308 ? Or is this approach asking for trouble ? I'd appreciate any other options from experienced reloaders The new gun is custom so I want to do it justice with the reloads. Thanks AndyCM Link to comment Share on other sites More sharing options...
Chris-NZ Posted May 6, 2008 Report Share Posted May 6, 2008 I have a new 7mm-08 rifle coming ...as lapua don't do 7mm-08 can I neck down from . 308 ? AndyCM Case made this way are fully usable but you'll end up with slightly short necks from the process. Chris, NZ Link to comment Share on other sites More sharing options...
Stover Rover Posted May 6, 2008 Report Share Posted May 6, 2008 I tried necking down some quality RWS .308 brass to 7mm it was OK but never matched the reloaded Federal 7mm-08 factory brass, groups were 50% larger for the same load combinations. Cheers Simon Link to comment Share on other sites More sharing options...
Tikka 260 Posted May 7, 2008 Report Share Posted May 7, 2008 I neck down Lapua .308 in one resize to 7-08 in a Redding FL die. No problems at all. BUT I also have some new Norma 7-08 brass which will get used eventually. ATB Link to comment Share on other sites More sharing options...
AndyCM Posted May 7, 2008 Author Report Share Posted May 7, 2008 Thanks for sharing your experiences, most helpful. A reloader is always learning eh ! AndyCM Link to comment Share on other sites More sharing options...
Scotch_egg Posted May 7, 2008 Report Share Posted May 7, 2008 I use remmington brass, i dont get throught the relaods some of the lads on here do. I have had great results with varget powder. Good choice of cal. Please post the details of your rifle. We all like customs. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.