HELP Spur mount

[Ballistic Hamster]

Hi looking for ;

SPHUR MOUNT 34mm to fit PMII then to go on a TikkaT3

 

Price Please and who sells them would be good thanks

[Scotch_egg]

Best bet is to PM Haken Spur direct on here. He will send you a price list and catalogue.

[AnthonyR]

The webshop is here:

 

http://spuhrwebbshop.noxshop.se/

 

I have one on order at the moment.

 

I PM'ed Spuhr on here before buying because I wanted to get the height right for my PMII

[lee w 118]

Hi looking for ;

SPHUR MOUNT 34mm to fit PMII then to go on a TikkaT3

 

Price Please and who sells them would be good thanks

GLEN if you give me a ring i cangive you hakans phone,no ATB LEE

[Spuhr]

My recomendation is to go for the ST4701 that is our TRG mount with 7mils/24 moa inclination (35mm high).

That goes directly on to the T3 rail, but as the ejectionport is all the way up in the rail, the ejectionport needs to be lowered by 2,5mm. In my opinion is the T3 ejectionport missplaced and sits to high originally as the brass alwyas hits the port in the bottom and from there jumps up.....

This solution is giving the best and most stable mount.

 

If you prefers to compete in the picatinnyrace (the one who have the most yards of picatinny on his guns when he dies wins..... )i can recomend the SP4601 (30mm height and 6mils/20,6moa inclination)

In such case you donät have to lower your ejectionport

 

 

Here is the SP4702 (7mils/24moa inclination and 44 mm high) with a Hensoldt 6-24x72 scope

Device on left side is our QD attachment for ACI and there is also mounted a Aimpoint T1 at 1,30.

Ejectionport lowered on this gun.

 

Håkan