n8ess Posted May 16, 2011 Report Share Posted May 16, 2011 Just interested in others views regarding the sequence you clean and re-size your brass. This is mine De-prime Ultrasonic clean in a solution of 50/50 white vinegar & water with a splash of Fairy Resize the Brass Check case length De-bur Tumble Load them up ATB Neil Link to comment Share on other sites More sharing options...
Finman Posted May 17, 2011 Report Share Posted May 17, 2011 This is what I do: - de-prime and resize in one pass (checking case length) - soak in 1:6 Cillit bang/water solution for 2-3 hours - dry and then tumble - clean primer pocket (or primer pocket uniform) - chamfer throat (in and out) - polish throat with wire wool - load best wishes, Finman Link to comment Share on other sites More sharing options...
6.5shooter Posted May 17, 2011 Report Share Posted May 17, 2011 This is what i usually do : Remove neck bushing from sizer die and deprime. Soak cases in lyman case cleaner solution for 10 mins Leave to dry Ream pockets and brush case necks inside. Put bushing back into die and neck size. Trim length if need be and camfer edges. Tumble Load up Shoot Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.