Elwood

£120 posted

Advertised elsewhere.

180 grain Hybrid, 15 thou from the lands, 3.275 inches.

How many cuts, free bore and neck diameter?

PM sent

11 minutes ago, Tom Dodd said:

Do you have a rough size using a 180gn?

Will do it tomorrow.

20 minutes ago, Ronin said:

Is there an advantage of the KMR over Shehane Ian ?

Yes Andy, primarily the use of N165 to get Shehane speeds at 2930 fps, something I could never do with the Shehane. The extra case capacity also allows for a higher velocity than a Shehane if you’re chasing speed.

The gain over the Shehane is the same as the gain a Shehane has over a .284 W

This cartridge is ideally suited to the available and very barrel friendly VV N165.

23 hours ago, Tom Dodd said:

What is the COAL on this round?

That’s all dependent on the bullet you choose.

Fits a 34mm tube. With my failing eyesight I thought this might help reading my turrets, and it did. However as I dial all my wind, it kind of got in the way but it certainly works.

£40 posted

I have two custom cases, one for the Joypod and one for the Seb Mini. Both have one inch protection foam, outer material is strong and waterproof and both have carry handles.

£40 each plus post, or I can meet at Bisley.

7mm KMR reamer with two cuts, basically it’s a .284 ackly improved, 316 neck which means minimal neck turning. Set of Newlon custom dies, FL, Neck bushing and micrometer seating die, 200 fire formed cases, 4 times fired with at least another 4 firings of life. 1 Hornady modified case.

This cartridge is more than capable of pushing 180 grain projectiles up to 3000 fps, but mid 2900’s is more common.

£450

Sold

I have 3 boxes of the above, 300 in total. 

£25 per box , sorry I wont split, so £75 plus post.

To give you an idea of how flat, this was shot with a .308 FTR rifle.

Not trying to burst your bubble, but the bottom target was shot on a TR target, which is twice the size of a F class target.

The top looks respectable but elevation has killed you, you’ll need to hold 1/2 MOA elevation or less to be truly competitive. Get a load that shoots super flat and then work on the wind.

GB F class association is holding a introduction to F class weekend in March, I will try to get the details put on the forum. 

5 minutes ago, Scotch_egg said:

Tell us more about this annealer 

Quick annealer, South African made, supposedly better than the AMP and cheaper to boot, time will tell.

I have one unopened tub of RL16 which I’m embarrassed to say is £75, or I would swap it for RL23 ( fat chance 😁 ) or 1kg of V N555 and a cash adjustment.

Can meet at Bisley or collect from West Sussex.

John, from everything I have read (probably the same source as you ) accuracy wise there won’t be anything in it, but the Garmin will just be so much easier to use.

and yes I have my name down for one.

And now there’s a new and supposedly better induction annealer coming on to the market…

One 8 lb tub ( a few ounces short ) of RL 26 £520 which works out at £65 lb

Sorry but I won't split. 

Based in West Sussex but I'm often at Bisley.

Advertised elsewhere.

Sold

Replied

Please add your location in your profile.

TTT

3 hours ago, SikaJames said:

Hello,

Does anyone use a light filling for their rear bag , for F Class ?

I have heavy sand, but it means the bag weighs on tonne.

There must be a better way !

James

There isn’t.

For sale a auto trickler V2 with Area 419 upgrades, including

Area 419 High capacity hopper and the original powder hopper

Area 419 motor housing

Area 419 trickler and base plus spare belts

Area 419 powder shoot and baffle

Blue tooth upgrade

Scales not included

£300 inc postage or I can meet at Bisley.