Adamdavi3s

FX Dreamline tactical compact .177 
MDT vertical grip (original included) 
MDT SCS Lite 
FX folding stock adapter 
Element Helix 6-24 FFP MRAD Clean 
Burris XTR signature rings 
Additional liner and probe 
One carm 13round mag (no original because they’re rubbish!) 
Carm chamber safety flag 

amazon special bipod 

Total new cost £2125(approx)

Sale price £1500 or £1100 without the scope and mounts 

I am only looking for an FX Panthera 500mm (non Hunter) regarding swaps. 

Pictured moderator is not included but I think I have another similar sized one I can include.

I’ve set it to just shy of 11ft/lb using 8.44 and on a still day I can smack my 20mm 50y spinner all day long.
It is very accurate, consistent and quiet. 

Please note the sniper tape is on there to avoid any rubbing on barricades and the such and it can be removed with minimal fuss and no residue. 

Collection is welcomed where time / weather permitting you can try it out to 100y 

I will post, my preference would be to break it down to send it special delivery with appropriate insurance, I am pretty sure it will pack small enough. 

Please note that unfortunately the original box and the lite stock were lost to the great asbestos discovery of 2023 


History:

Purchased new by me as a .22 lite from my LGS about 18 months ago. 

Added the carbon bottle (used), .177 liner, transfer port (new dual one) and probe (all new) as I wanted .177 to give more velocity for the 100y shots. 

Note I did not change the shroud (I don’t know if they are calibre specific but I have not seen any impact on accuracy) 
The original liner and probe are included so you just need a transfer port and mag to switch back to .22

I’ve set it to just shy of 11ft/lb using 8.44 (about where they come from the factory) and on a still day I can smack a 20mm 50y spinner all day long. 


Any questions please just ask!

Up

Up

Up

Man, seeing those I can't wait to get hold of some R50 for the vudoo again!

Cracking shooting chaps

Had the Vudoo out this morning, new dress and glasses for hopefully some PRL this year. 

50Y 10round groups with SK LRM, groups (excluding the two singles) seem to have opened up a bit but its the first time I have shot her since the summer so could just be me 🤷‍♂️

And my embarrassing attempt off the barricade in 70seconds 

Deal agreed with @l1ukers thanks bud 👍

Brilliant bit of kit, I am just trying to cut down on how much kit I have.
Found this invaluable for training as you can watch those shots back where you KNOW you definitely hit it  plus you can use it like a dictaphone as you do. 
About a year old from memory, I bought it from my LGS on a whim. 
Includes the trigger cam and all the shims. 
I’ve also added a 128gb card and a GoPro hard shell case which I used for carrying the camera in my kit bag. 

£500 posted

Video of 281y rimfire: 
 

Video of a mile NOTE I had not set up the focus for the camera with this scope:
 

Sorted for an Athlon now 👍

Hup

13 minutes ago, pbear94 said:

Shame about the reticle. I'd have swapped my ares for it.

Yeah it may suit some people but I am not a fan, the Athlon ones just keep it simple for my simple brain 🤣

I got this to try out but I really just do not like the reticule at all, I’ve never mounted it but have spent a few hours looking through it and I just prefer my existing Ares ETR and want a second to match because the reticule just works for me.

The illumination in this is better as it just highlights the centre and the glass is marginally better. 
 

overall good condition, glass is superb as you would expect. I have noticed that with the IR on, there are some points that light up (not as bright) on the reticule outside the centre illumination but this might be normal when the brightness is too high? I don’t really use IR

Ideally swap for an Athlon Cronos / ETR with cash adjustment but I would sell for £1015.45 posted as there is an ETR for sale 

or of course collect from devon / bristol 

Up offers?

Up we go

Up and a price drop

Up we go 

A few more photos these do not show the smaller ARCA fitted 

Up

Up

bump

Full size photos attached. 

brass being sold on the left and a new one on the right 

Long story short, had this on the shelf for years after buying as new / once fired from the forum (I don't recall which) 

Drilled the flash holes out to 2mm, loaded it all up fine, BUT stupidly I guess I didn't size it (thought I had!)  as got to a PRL match in Feb and it was not feeding and when it did it was sticking in the chamber in my savage 12LRP (but shot fine 😆). 

I can't get it to size 

Someone on here had it from me before, but have then had issues with their rifle not arriving so they never got the opportunity to test it and have kindly returned it to pass on again . 

The deal is you buy it for the cost of postage, and if it works then we have a gentleman agreement to pay me a fair price, and if not then you scrap it. Due to this it is only available to long standing members who have contributed to the forum 

There are 90+ cases from memory 

Photos to follow shortly 

Up

On 9/26/2023 at 8:41 PM, SeaMonkey said:

I'll second that wholeheartedly 👍

Thirded 👍

3 hours ago, Charlts said:

Looking good dude, was that indoors or outdoors?

Thanks! I think I originally let the Vudoo Facebook groups get to me “1/2 INCH OR DEATH”  actually to make the whole point of the thread

an inch at 100 without trying too hard and £7 ammo is more than adequate

Outdoors down at Budleigh, lovely weather just a slight breeze 👍

Hi all,

just wondering if anyone has any data for the 208eld-m in 300PRC regarding OAL? 
Hornady have the 200 and 212 on the data sheet but not the 208, I’m assuming I can’t simply “split the difference” due to the different shapes. 
 

Just looking for a starting point to work back from, or maybe I just shouldn’t be lazy, and try and work out where the lands are 🤣