![](http://content.invisioncic.com/l87729/set_resources_1/84c1e40ea0e759e3f1505eb1788ddf3c_pattern.png)
![](http://content.invisioncic.com/l87729/set_resources_1/84c1e40ea0e759e3f1505eb1788ddf3c_default_photo.png)
Adamdavi3s
-
Posts
642 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Articles
Posts posted by Adamdavi3s
-
-
Sorry just realised this might be in the wrong forum?
-
All,
I have a very old tacsol ar15, cheap and cheerful and good fun.
At the moment every few rounds it’s refusing to fully load a round, in that the trigger clicks, I wait 30s, drop the mag, pull the charging handle and I can see the round protruding 1/2 way out of the chamber. Letting the charging handle go seats the round and it will fire fine.
I have stripped cleaned and oiled everything.I’m using it with the blackdog mags it came with, plastic lipped versions and I am wondering if they might be the problem, or Is it more likely something else?
-
-
-
I do actually have a sling stud adapter from my tactical which I will never use, but I am not sure if they are compatible with the evolution or not
-
3 minutes ago, Ozalid said:
PM sent
Hi, yep as pictured it has the adapter fitted on it so ready to drop straight on a rail 👍
-
-
-
I just need to check my thread is 18x1 but I’ll likely take the bridge- will get back to you later
edit: Apologies but looks like I need a different thread
-
-
-
-
-
-
-
MDT FDE 18” no rail forend
has been fitted but not used or outside. Unfortunately my barrelled action arrived 2” shorter than anticipated so I’ve had to downsize to the 15” version.
I've removed the sling point (included) and it has had a short rail fitted and removed but it is in excellent overall condition
£175 posted in the UK
-
Absolutely cracking 👏
-
20 hours ago, 1066 said:
Looks very nice indeed 👌
I have pretty much zero skill in this arena!
-
Up, would trade for a greater quantity of 223 brass
-
15 hours ago, baldie said:
Who knows Sean.
One-offs are never a problem. Coming up with a size that would fit a range of barrel profiles and what tuner thread they could accept could be a bit of a challenge.
Getting them cnc machined would be the easy bit.
I’d definitely be interested. Could you come up with something which rather than being threaded, used some sort of sleeves to get 95% of the fit and then tightened down?
-
This is a bit weird as I stumbled down the rimfire tuner rabbit hole over Christmas and only just came across this.
I’ve just got some 0.1 and 0.3mm washers (buggered if I could find peel washers this side of the pond) to see if I can “tune” using my mod on my RPRR.At the end of the day my [lack of] ability will far outweigh any gains from a tuner in the real world but I’m really intrigued
-
SOLDHawke sidewinder FFP 6-24 Mil ret IR
Boxed with everything as new and in excellent condition, just with one small mark on the sunshade
Has been mounted on my rimfire in Burris signature ringsThe only reason for sale is I wanted the element helix with the floating dot ret as it more closely resembles my full bore rets
£sold collected from mid devon or plus postage cost
Not looking for offers as I’d rather hang on to it as it’s an absolutely cracking piece of glass
-
-
268 hornady 6.5 brass + 10 S&B
138once fired (some cleaned)
130 twice fired
£110 posted the lot
HERA Mlok rail, 15” was ex demo from parabellum. Good condition and a fantastic rail, was just slightly to long to work on my AR. Includes the barrel nut, does have some marks just through having had things fitted to it
£120 posted SOLD
.22AR not fully loading rounds
in Tactical
Posted · Edited by Adamdavi3s
That’s what I wondered, just seemed to be a weird issue so wasn’t sure if it was the bolt.
I wondered about the S&W mags, but wasn’t sure if I needed (or should try) the Boonie Packer
*edit* Ok so I don’t think the boonie will work with a tac sol. I wonder if it’s simply ammo, I’ve realise I was running club in it today and moderated, rather than action / contact that I normally use so I bet it just didn’t have the oomph to cycle properly.
My mind just went to bolt / chamber issues as it’s resetting the trigger and ejecting fine, just the next round feed which isn’t happening correctly.
I’ve ordered a steel lips black dog to see if it helps
edit2: It’s not ammo as I’ve had the issue on the first round