Malinois

I’ve got some RS52. I’ll try it. Cheers.

What’s the barrel length of your rifle Kev?

Hi, Quickload models Viht 135 with 95 grain vmax as quite efficient in my .260 Rem. 20 inch barrel so the usual slow burn 6.5 powders are out. Anyone else used N135 in this combination? Thanks

Ta

Is the dovetail on a Tikka 595 same as the T3 dovetail? Thanks.

Hijacking. But I have two full boxes for sale. Same price

As per title £100 posted.

Bump

This is my left handed Tikka T3X in .243 Approx 500 rounds. Recent clean bill of health on the bore and recessed crown completed by Steve Kershaw. Three round magazine, super condition. Threaded 14x1. £500.00 o.n.o. Can Supply with Wildcat Evo Sound moderator if required at extra cost. Also advertised on The Stalking Directory.

Cheers So my JB Weld Idea should work? Ta

That's the one Dave as you built it. Only said AW as that's what Sporting Services said when I was looking at some bits.

It’s the bolts on the underside I want to remove. I can see that the ones holding the skins on are 4mm

http://www.accuracyinternational.com/assets/ai-15599-01-ax-aics-2014-installation-instructions.pdf

Yep. Says 3/16 Hex insert to 6nm

I was reading on the AI site some instructions that said they were 3/16. It’s an AW. I’ll try find the instructions again.

.

Think I’ve solved my own problem. Bought a 3/16 standard L shaped hex wrench. Going to cut it off and JB Weld it into a 1/4 socket.

Hi, I need a 3/16 Hex bit to remove my action bolts. They have to go through the plastic of the chassis so need to be long. I ordered some long imperial bits on sockets but the shank of each bit is too wide to fit through the plastic. I want sockets or screwdriver bits so I can use a torque wrench. Without buying from AI anyone got any ideas?

Bump

Inbox is full. Got any pics?

Interested. Inbox is full.

May be interested in the 6x47 Barrel.

Baldie converted mine. It works perfectly.

You sold the Leica???

If someone bought my left hand 6.5x47 I’d have this. Always wanted one.