Aggy

Having sold my Fx impact I no longer have any use for the spare barrel kit .

stx superior heavy liner ,

barrel outer jam nut breach 

shroud and end can moderator 

magazine 

full tin of jsb pellets  3/4 tray of fx slugs 

the barrel is on ticket so you will need a slot for it 

£200 all in 

photos on request 

I read the site had gone bust so I guess this is a new site they had ticking in the background,something to do with creditors data leaks and the like 

This is when I got the thermal it not on a rifle just looking in the local park , end of the field 234 yard the building at the end 475.

if you look at the container the thermal picks up the different temp on the paint on the graffiti 

This is total darkness,will try and post a video

Try 27 and 29 ,.

what liner do you have , is it carbon sleeved at all ,

with mine it was a 700 mm stx superior but I had epoxied the liner into a carbon sleeve ,you have to get the length purge t and still retain the oring at each end but it stiffens the barrel 

50 yard group with my Raw my impact would do the same on a still day they will both do it at 100 with slugs , my Raw runs at 50 ftlb my impact would do 70 ftlb but I ran it at 60 in .22

Have you considered thermal , yes more expensive but very good , I have a Hikmicro stella and really rate it 

Your impact will group better than that at 50 ,

what are you shooting and what ftlb 

Be careful with the Panthera it has to be filled up every mag at full power 

What are you going for ? 

Surly precision shooting is just that regardless of rifle choice ,no powder prejudice 🙂

Not bad going , what slugs are you using ?

I just sold my two impacts , mk1.5 very sortedfac and a mk2 subby .

I do like the impact but needed a change , 

I am convinced an air gun can beat a .22 lr , shot to shot constantly is nigh on perfect.

They have come on a long way , look at the Fx Panthera , shooting at 300 yard 

This is a 12 shot group shot yesterday in a fair breeze at 50 yard with my Raw HM1000x  precharged air rifle using 25 grain slugs at just less than 1000 fps ,the patch was there prior to shooting the group the flyer was the second to last shot and probably down to me 

Firstly thankyou for your replies 

I have done some digging  and believe it would be legal to have section one but as I already have a section one air rifle if I push  forward the gun will 100% stay as a sub 12 ftlb rifle 

Good evening all am I right in thinking the minimum length of a rifle section one is 16 “

the gun in question is a pre charged pneumatic air gun called an Edgun Leshiy 2 ,

the air source is in the buttstock,it folds in half at the hinge between the receiver and the buttstock, and that’s where the magazine goes .

it is self indexing Not semi automatic,as it fires from the magazine and doesn’t load from the mag .

rate of fire 8 shots in 1.8 seconds power is dependent on calibre.they go upto .30 cal and 100 ftlb ish 

never seen one in this country on ticket ? 

I have been and knew the owner years ago Glen , but as far As I am aware they don’t do pay and shoot type shooting it’s a membership thing and only 25 yard , it is a very nice set up though 

Hello a does anyone know anywhere near Barnsley that has an indoor range suitable for .22 lr and fac airguns I am just looking to zero a thermal scope I have bought , I am swaging my own slugs too so would like test in a windless environment,

any farmers land owners wanting any rats blatting indoors would be totally fine too 🙂

Thank you 

Hi Guys Something a bit different, I have an interest in shooting fac pcp airguns and have had several makes , the out and out power winner was the fx impact , but my favourite is my Raw Hm1000x , for those of you old enough to remember Theoben this is the latest in carnation .

so the question I am making slugs with a Corbin press and can make anything from 20 grain up to a ridiculously huge 73 grain , I have found the slugs work at 950 fps upwards , the Barrel I have is a lother walther polygonal unchoked at 24” long .

as I am pushing into rimfire speeds would a rimfire barrel be a better choice and if so what 

Did this sell 

Sold and collected 

Sold pending collection 

Hi guys selling to make way for the next project 
This one is my fac mk 1 but it has the following upgrades over the std mk1 
Power plenum 
Mk2-mk3 magazine plate and one large magazine 
Slug power kit with .22 .25 and .30 sleeves 
a new 480 carbon cylinder from a mk 2 
Cerakote top plate , shroud , rear plates , Picatinni rail .
Stx barrel system 700 mm long with stx superior liner that has been carbon sleeved .
The gun will be advertised elsewhere if there is no movement here .
£750 
Obviously face to face and you must have the empty slot

I have a saber tactical trs and a prs bottom rail available too 

for those who have not shot fac air they can be more accurate than a rimfire and definitely more consistent,300 yard shots are not out of the question with slugs 

Sightmark wraith on special at various places , much better unit