gazzarM1 Posted March 31, 2018 Report Share Posted March 31, 2018 Looking to buy a case separated head removal tool .Who sells them ? Need a 338 variety Thanks Link to comment Share on other sites More sharing options...
Akeld Posted March 31, 2018 Report Share Posted March 31, 2018 Brownells have them Link to comment Share on other sites More sharing options...
terryh Posted April 1, 2018 Report Share Posted April 1, 2018 Gazza is this as a precaution or do you have a stuck case? if the latter then sometimes a bronze cleaning brush, one size up from the ID of the case, drawn into the stuck case from the chamber end (using cleaning rod down the barrel) then pushed out works? brgds T Link to comment Share on other sites More sharing options...
Brillo Posted April 1, 2018 Report Share Posted April 1, 2018 Plus one on terry’s method. It works every time. Link to comment Share on other sites More sharing options...
ejg223 Posted April 1, 2018 Report Share Posted April 1, 2018 In the field, strong fence wire cut with leatherman, bend a hook with the sharp end showing outwards. Adjust so that the hook is slightly larger than the inside of case. Push in and sharp end will dig into brass. Just pull out the case. Got me out of trouble once. edi Link to comment Share on other sites More sharing options...
gazzarM1 Posted April 1, 2018 Author Report Share Posted April 1, 2018 Sorted now gents thanks.....M.O was a 12g bronze brush wrapped in a bit of cammo tape at the end an rotatated into the case on the end of a 12g cleaning rod then a mate yanking it out whilst I held onto the upper receiver.....job done.....happy now but a few 338 cases now going for recycling ! Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.