blackjack Posted July 25, 2009 Report Share Posted July 25, 2009 hi just loaded some 95g hornady sst in 243, this it is the first load i have loaded for 243. followed the manual and trimmed cases to 2045 and seated bullet to give 2710 col. the canulure on the bullet is about 5mm away from the brass,why is this ? cheers Link to comment Share on other sites More sharing options...
1967spud Posted July 25, 2009 Report Share Posted July 25, 2009 hijust loaded some 95g hornady sst in 243, this it is the first load i have loaded for 243. followed the manual and trimmed cases to 2045 and seated bullet to give 2710 col. the canulure on the bullet is about 5mm away from the brass,why is this ? cheers according to the hornady load book your col should be 2.630 Link to comment Share on other sites More sharing options...
blackjack Posted July 25, 2009 Author Report Share Posted July 25, 2009 according to the hornady load book your col should be 2.630 cheers spud Link to comment Share on other sites More sharing options...
Ronin Posted July 26, 2009 Report Share Posted July 26, 2009 Dont worry about the canelure being out of the case - its only purpose on these bullets it to hold them together on impact. Personally, I would seat the bullet to your rifles throat rather to "manual" spec. Link to comment Share on other sites More sharing options...
.jpg.0972b4e2bdf0b5a4109eb96f2b1b62ad.jpg)
(200x135).jpg.0fd0a94f065c6cb243fdff1b40e0819a.jpg)
Recommended Posts
Archived
This topic is now archived and is closed to further replies.