1967spud Posted April 29, 2009 Report Share Posted April 29, 2009 right second question 140g amax lapua cases 140 bullet measure .264" case walls measure .0155" working on that theory .2640+.0155+.0155=.2950 rifle has a .298" neck what redding bushing would you use to put in the neck sizing die? i have not turned the necks yet either as i am reluctant to do much untill i get the rifle Link to comment Share on other sites More sharing options...
Berger Posted April 29, 2009 Report Share Posted April 29, 2009 get two 296 and 295 by the way "thanks " Link to comment Share on other sites More sharing options...
1967spud Posted April 29, 2009 Author Report Share Posted April 29, 2009 cheers pete and you were welcome Link to comment Share on other sites More sharing options...
SteveW Posted April 29, 2009 Report Share Posted April 29, 2009 i have not turned the necks yet either as i am reluctant to do much untill i get the rifle Hi Mark Surely you need to wait until you've neck turned, or at least decide what you are going to turn the necks too, then deduct 0.002" -0.003". Get it right the Ti Ni bushings are not cheap for what you get. Cheers Steve Link to comment Share on other sites More sharing options...
1967spud Posted April 29, 2009 Author Report Share Posted April 29, 2009 yep you are right mate , i will only be turning them to 80% clean up at the most Link to comment Share on other sites More sharing options...
1967spud Posted April 29, 2009 Author Report Share Posted April 29, 2009 ok thats leads to another question then whats the thinest safe wall dimesion? Link to comment Share on other sites More sharing options...
1967spud Posted May 1, 2009 Author Report Share Posted May 1, 2009 would i be best to use the virgin brass once before neck turning or ...........neck turn from virginalj Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.