chaz Posted July 22, 2022 Report Share Posted July 22, 2022 As above really, I'm in the middle of changing the seals on my Daystate (FAC) Air Ranger in .25 Cal. I've been told to replace the seals dry, by some, yet others say they last longer, and fit on more smoothly if I use a very small amount of silicone grease. I'd appreciate some constructive opinions/ experiences as to the better way forward. I'm more inclined to think a small amount of silicone grease would aid fitting and sealing??. Cheers Chaz. Quote Link to comment Share on other sites More sharing options...
Aggy Posted July 22, 2022 Report Share Posted July 22, 2022 I always use a very light smear of silicon grease on o rings ,did the same when diving for scuba gear and airguns for probably 30 year ‘ less is more . Quote Link to comment Share on other sites More sharing options...
chaz Posted July 22, 2022 Author Report Share Posted July 22, 2022 Cheers Aggy! 👍 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.