GermanGunShop Ranger for T3(x)

[Deker]

Due to a change of mind I have a brand new unused (replaced under warranty) Ranger gunstock by German Gun Shop for a right hand Tikka T3(x), for those that don't know here's the sales description:

"It consists of multiple cross-laminated birch wood layers, which are soaked together in epoxy-resin and bonded after milling with an extra epoxy resin-skin. The Epoxy gives the Stock a hard surface which effectively protects it against scratching or dents. Our colors are also made of colored epoxy resin. This makes it not only splash-proof, but even submersible! This "Cross Over" combines the positive qualities of "absorbing power" of a solid wood stock with the robustness and precision of a synthetic stock.

It is ambidextrous and both sides usable to get, for example, in stressful hunting situations quickly and safely leveling of the gun for all types of standing, laying or sitting. The handle area as well as the foreend is coated with a special grip varnish, to offer secure handle with sweat or wet hands always.

Stocks have a solid full-block-bedding made of high-grade 7075 Aluminum with an integrated stainless steel recoil lug. The advantage is its extremely high tensile strength, which is higher than the tensile of steel for structural purposes, yet very light.
Thus, the Action is kept absolutely firm and torsionally stiff!"

 

NOTE: this stock has been provided from the factory to use a AtlasWorxs DBM (https://www.atlasworxs.com/collections/tikka-t3-t3x/products/atlasworxs-bottom-metal-dbm-tikka-t3-short-action) so would need one of these if you don't already have one.

The current price on these are £692 so would accept £550 o.n.o posted

This is also for sale elsewhere.

 

[Xtrema]

Is that a Picatinny rail on the fore end?

[Deker]

Just now, Xtrema said:

Is that a Picatinny rail on the fore end?

Hi, 

Yes it is, it was an optional extra I bought on the original

[n3al]

Do you have a picture of the inlet

[Deker]

1 hour ago, n3al said:

Do you have a picture of the inlet

Hi, 

Yes I've attached them along with the Atlasworxs footprint

Atlasworxs Bottom Metal for Tikka T3 SA Foot Print.pdf

[n3al]

Cheers, I wanted to see how hard it would be to convert to left handed, looks like a new stock would be cheaper 

[Deker]

48 minutes ago, n3al said:

Cheers, I wanted to see how hard it would be to convert to left handed, looks like a new stock would be cheaper 

Order sooner rather than later as there could be import and customs issues next month 

[Deker]

Sold