Jump to content

Xtrema

Members
  • Posts

    210
  • Joined

  • Last visited

Everything posted by Xtrema

  1. Do these mags wobble about like the standard T3X mags?
  2. Typo in your title. You have a 2 4.5-27x56. It's a fine scope by the way; i have one. Quite heavy though and for some inexplicable reason not the easiest of scopes to sell.
  3. The only info i can find is a LOP of 14 3/4". The Length of pull can be altered by changing the Inflex II pad or by inserting spacers, which are available separately.
  4. I bought this shotgun from new 2 years ago and i have only been out with it twice. Consequently this gun is in as new condition, unmarked and showing no signs of use. As this gun is a cabinet queen and taking up space, it needs to go to make room for a new project i have in mind. Just 3 boxes of cartridges have been through this gun from new. Browning plastic case is included with a full set of chokes, alternate trigger and the kit for auto safety (not fitted). Photographs were taken in bright sunlight making the wood look a lot paler than it actually is. £2000 Advertised elsewhere.
  5. For what it's worth, i've been using CCi 400 primers for many years without a single mishap.
  6. I guess i was lucky getting a target at Short Siberia yesterday afternoon then.
  7. On close examination they definitely are stitched in. I wish I'd known that before i bought it as one of the swivels won't screw down and lock properly.
  8. Does anyone know if the sling swivels on the Roetex Hunter Pro sling are removable?It looks to me as if they are effectively stitched into the straps which seems a bit silly.
  9. Here you go. Cartridge : 7 x 64 Brenneke Bullet : .284, 139, Hornady GMX 28270 Useable Case Capaci: 59.704 grain H2O = 3.877 cm³ Cartridge O.A.L. L6: 3.307 inch = 84.00 mm Barrel Length : 24.0 inch = 609.6 mm Powder : Vihtavuori N160 *C Predicted data by increasing and decreasing the given charge, incremented in steps of 2.0% of nominal charge. CAUTION: Figures exceed maximum and minimum recommended loads ! Step Fill. Charge Vel. Energy Pmax Pmuz Prop.Burnt B_Time % % Grains fps ft.lbs psi psi % ms -20.0 79 41.92 2131 1402 23508 6826 78.6 1.669 -18.0 81 42.97 2184 1472 24934 7083 80.0 1.630 -16.0 83 44.02 2236 1544 26447 7339 81.4 1.592 -14.0 85 45.06 2289 1618 28056 7594 82.7 1.556 -12.0 87 46.11 2343 1694 29763 7847 84.0 1.519 -10.0 89 47.16 2397 1773 31577 8097 85.3 1.484 -08.0 91 48.21 2451 1854 33507 8343 86.5 1.450 -06.0 93 49.26 2505 1937 35557 8585 87.7 1.416 -04.0 95 50.30 2560 2022 37740 8822 88.9 1.384 -02.0 97 51.35 2615 2110 40065 9053 90.0 1.346 +00.0 99 52.40 2670 2200 42541 9278 91.0 1.309 +02.0 101 53.45 2725 2292 45183 9496 92.0 1.273 +04.0 103 54.50 2781 2386 48001 9706 93.0 1.238 +06.0 105 55.54 2836 2483 51012 9907 93.9 1.204 +08.0 107 56.59 2892 2581 54231 10099 94.8 1.171 ! Near Maximum ! +10.0 109 57.64 2948 2682 57658 10280 95.5 1.139 ! Near Maximum ! Results caused by ± 10% powder lot-to-lot burning rate variation using nominal charge Data for burning rate increased by 10% relative to nominal value: +Ba 99 52.40 2824 2462 50602 9634 96.8 1.211 Data for burning rate decreased by 10% relative to nominal value: -Ba 99 52.40 2484 1904 35140 8553 82.3 1.421
  10. I should imagine they are easily lost, though i believe the idea is to take it off when not in use. I do like the fitting options though. I also like the pan function and the ability to have it fixed if necessary. It's an interesting design.
  11. Does anyone have any experience of these bipods? They look quite good. Quite pricey though for what they are.
  12. I picked up my new Tikka T3X CTR in 223 yesterday. I was shocked at how wobbly ,the magazine fits to the action. I can't pull it out but it wobbles from side to side a lot and even front to rear. I have seen seen a couple of 'fixes' on YouTube but reluctant to try it on e new rifle. It appears to be a common issue apparently.
  13. I have tried a few auto tricklers, I use one just as a thrower these days and trickle to weight with the Target Master and beam scale, excellent piece of kit. Message 1066 (he makes them) on here for more info.
  14. Apologies. I didn't have my glasses on when i looked at the pictures; which, to be fair, aren't the clearest. The stock coating is not the nicest I've seen. The only issue i have with that rifle is that it's single shot.
  15. There's a Remington on Guntrader. >>Click Here<<
  16. It looks like your only option is a full custom.
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use and Privacy Policy