Guest Tiff Posted December 10, 2008 Report Share Posted December 10, 2008 I've picked up an immaculate wooden stocked Savage 110 (long action) in .308 for £150! I've sorted the barrel channel and am now looking at bedding it. So wheres the best place to get Marine-Tex? Link to comment Share on other sites More sharing options...
Ronin Posted December 10, 2008 Report Share Posted December 10, 2008 Er Devcon Plastic Steel Putty A is far nicer to use (less runny). Well IMHO anyway J&L Industrial. Link to comment Share on other sites More sharing options...
Guest northernchris Posted December 10, 2008 Report Share Posted December 10, 2008 Or Hysol Link to comment Share on other sites More sharing options...
baldie Posted December 10, 2008 Report Share Posted December 10, 2008 never understood the american preoccupation with marine tex either ? I,m with Ronin and Chris, i use devcon in the shop, plus the 5 minute devcon is great gear for setting pillars, aluminium spacers in mags, etc. I have used loctite hysol on several of my own guns too, and its great.Its easier to mix, as its 50/50.Devcon needs to be weighed really. we tend to get ours from cromwell, as we have one near, and their van delivers the next day. Link to comment Share on other sites More sharing options...
col48 Posted December 10, 2008 Report Share Posted December 10, 2008 the ones i have done have been done with Devcon Steel /devcon/ or devcon titanium. i all so set the pillars with 5 minuet adhesive,just enough to hold the pillars in place. you have to weigh it, and you really should be using the one with the smallest shrinkage.after all you are after a touch fit ATB Colin Link to comment Share on other sites More sharing options...
(200x135).jpg.0fd0a94f065c6cb243fdff1b40e0819a.jpg)
.jpg.0972b4e2bdf0b5a4109eb96f2b1b62ad.jpg)
Recommended Posts
Archived
This topic is now archived and is closed to further replies.