Chris-NZ Posted November 4, 2008 Report Share Posted November 4, 2008 I've acquired cheaply a custom-built 6mm Rem for my nephew. I've no experience with any of the 6mms (only .260 up) and would value some suggestions &/or comments about possible deer loads. Was thinking about 90-100gr projectiles as these are for reds. Thanks for any info. Chris-NZ Link to comment Share on other sites More sharing options...
Vermincinerator Posted November 5, 2008 Report Share Posted November 5, 2008 Hi Chris, Although IMO better then the 243, the 6mm Rem is pretty scarce in this country so i would say that its use would be pretty thin on the ground. One thing i will tell you that may be of help is that anything that works in a 243 will work equally as well in the 6mm Rem. Ian. Link to comment Share on other sites More sharing options...
Chris-NZ Posted November 6, 2008 Author Report Share Posted November 6, 2008 Hi Chris,Although IMO better then the 243, the 6mm Rem is pretty scarce in this country so i would say that its use would be pretty thin on the ground. One thing i will tell you that may be of help is that anything that works in a 243 will work equally as well in the 6mm Rem. Ian. Thanks Ian. Had a quick look on a few sites incl ADI. They list 36 of 2208 (=Varget) giving 2935 with a 100 grainer in a 24" bbl. This should tip over a red, long as the projectile design is OK. Of the 6mm projs fit for deer, what are people's favourites?? Chris Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.