Hobbit Posted July 17, 2017 Report Share Posted July 17, 2017 Hi I have a 22LR Anschutz 1710 D-HB It is very accurate and I like it but the ejector is weak - often failing to clear the cases I have seen that this is a common failing in Anschutz rifle - is there an after market fix or an anschutz savy smith that anyone would recomend? Thanks Link to comment Share on other sites More sharing options...
terryh Posted July 17, 2017 Report Share Posted July 17, 2017 Hobbit It is a common fault in some models derived by Anschutz going to a stamped part. It is a simple fix that you can do so long as you do not go at it like a Bull in s China shop I sorted my MPR and it now ejects reliably, do a few searches on 'MPR ejector problems' and there are good instructions with photos, I'm on vacation at present but can help you when I return if you still have issues? Brgds T Link to comment Share on other sites More sharing options...
Hobbit Posted July 17, 2017 Author Report Share Posted July 17, 2017 Terry, thank you - very helpful I'll wait till your back and get the download - never messed with a bolt before. Have a good break Best Hobbit Link to comment Share on other sites More sharing options...
aam Posted July 18, 2017 Report Share Posted July 18, 2017 I got the same rifle with the occasional case not being ejected; the empty case just stays in the ejection port. Here is a link which may be of interest. http://www.rimfirecentral.com/forums/showthread.php?t=471177 I myself have not done this modification to my own rifle as this only happens sporadically. If you happen to fix your ejection problem, please post the results on the forum. Would like to know how you went. Link to comment Share on other sites More sharing options...
stillair1 Posted August 4, 2017 Report Share Posted August 4, 2017 Does anyone have extraction problems with live cases in a 64 action (1417).Mine extracts fired cases ok. Thanks Link to comment Share on other sites More sharing options...
CliveWard Posted August 9, 2017 Report Share Posted August 9, 2017 Hi All, I sorted mine out after suffering years of tedious non-ejection from my XIV carbine. It doesn't exactly spit them out like the .17 HMR but they do now at least clear the action 100% making the rifle actually useable. Cheers Clive Link to comment Share on other sites More sharing options...
Hobbit Posted August 9, 2017 Author Report Share Posted August 9, 2017 clive what did you do? Thanks Link to comment Share on other sites More sharing options...
CliveWard Posted August 21, 2017 Report Share Posted August 21, 2017 clive what did you do? Thanks Fiddled about with it as per the instructions / drawings in the link provided. I bought a spare set to mess about with. Only real pain in the bum was getting the spring clip on and off. Cheers Clive Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.