gunner Posted June 6, 2015 Report Share Posted June 6, 2015 Hi , how are you sizing the necks ? Std Neck sizer , full length sizing or Neck bushing sizing ? The latter may be highly desired by allot of shooters wanting repeatable precision , iv only started using them in the last 1½ years . But this may not be an issue , its just that 200 yard group is strung vertically a fair bit ? Link to comment Share on other sites More sharing options...
wozar Posted June 6, 2015 Author Report Share Posted June 6, 2015 I use a lee full length sizer ,lee dead length bullet seating die then lee factory crimp die Link to comment Share on other sites More sharing options...
pork chop Posted June 6, 2015 Report Share Posted June 6, 2015 Have you shot the same load without the crimp Link to comment Share on other sites More sharing options...
wozar Posted June 6, 2015 Author Report Share Posted June 6, 2015 No didn't do any groups, i had problems with the standard stock moving and touching the barrel which was throwing bullets all ways. I'll give it a go Link to comment Share on other sites More sharing options...
1971silversurfer Posted June 7, 2015 Report Share Posted June 7, 2015 If you get the chance, take your mod off and see if it still throws... the harmonics of the barrel may be getting affected with the mod. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.