Brillo Posted May 1, 2015 Report Share Posted May 1, 2015 I've noticed that the jackets of some of my Berger bullets are tarnished, some a little and some quite badly. I'm hoping that this is just cosmetic but does it make a difference to accuracy? Thanks Link to comment Share on other sites More sharing options...
banus02 Posted May 1, 2015 Report Share Posted May 1, 2015 good morning,i had a similar problem with some hornady 129gr bullets ,<not loaded rounds> so ran them through the tumbler and they came out fine,hope this helps Link to comment Share on other sites More sharing options...
dannywayoflife Posted May 1, 2015 Report Share Posted May 1, 2015 I don't think this will effect accuracy Link to comment Share on other sites More sharing options...
Fishnshoot Posted May 5, 2015 Report Share Posted May 5, 2015 Had a similar issue with a box of nosler b.t's. Between the tip and the brass. Some were quite bad some were pretty good. Made bugger all difference. All still punched pretty much the same hole at 100 with no flyers. Link to comment Share on other sites More sharing options...
(200x135).jpg.0fd0a94f065c6cb243fdff1b40e0819a.jpg)
.jpg.0972b4e2bdf0b5a4109eb96f2b1b62ad.jpg)
Recommended Posts
Archived
This topic is now archived and is closed to further replies.