longbow3 Posted February 5, 2015 Report Share Posted February 5, 2015 Just ordered new forster co-ax today from Bushwear looking to use my Redding Full Length sizing die with it. Can anyone advice me on where I can find the correct locking ring to adapt the Redding die to the forster press? Ray Link to comment Share on other sites More sharing options...
1967spud Posted February 5, 2015 Report Share Posted February 5, 2015 got them here if you need any Link to comment Share on other sites More sharing options...
longbow3 Posted February 5, 2015 Author Report Share Posted February 5, 2015 That's great How much are they? Many Thanks Link to comment Share on other sites More sharing options...
Scotch_egg Posted February 5, 2015 Report Share Posted February 5, 2015 I just use me redding rings. Give them a try, I find the movement allows even more tolerance when indexing. As long as they are square which I am happy redding are then all you have to do is accept extra moe movement and measure your rounds accordingly. Link to comment Share on other sites More sharing options...
v-max Posted February 6, 2015 Report Share Posted February 6, 2015 Hi I find you get better value with the multi pack think it's 12 die rings. I'm sure the press comes with a couple rings as well or mine did. In fact they had Allen hex screws where the other rings I bought & on there dies have a Philips head screw for tightening the die lock ring. Hornaday rings fit well I was going to buy some to try as I some times help others loading hence I got a 12 pack as I just put my spare rings on there dies for my press. Link to comment Share on other sites More sharing options...
longbow3 Posted February 8, 2015 Author Report Share Posted February 8, 2015 Vmax many thanks for that, I will wait and see what arrives with the press. Thx again Link to comment Share on other sites More sharing options...
longbow3 Posted February 8, 2015 Author Report Share Posted February 8, 2015 Spud do you sell the 12 pack if I do need it? and how much is the 12 pack? Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.