leadpig Posted August 23, 2014 Report Share Posted August 23, 2014 anyone used this under a 52g a-max dave Link to comment Share on other sites More sharing options...
gunner Posted August 23, 2014 Report Share Posted August 23, 2014 anyone used this under a 52g a-max dave Well , used that cal and bullet but never that powder brand , have you actually tryed this combo yet? I could run QuikLoad with your col and powder charge to see if its safe / slow /pressure etc . Cheers tim Link to comment Share on other sites More sharing options...
leadpig Posted August 23, 2014 Author Report Share Posted August 23, 2014 nope but due to my location beggars cant be choosers managed to get 200 a-max and a friend said he would do me a good deal on the powder as he bought to much lol. ideally i wanted n133, but only one guy over here stocks powder and he does not have any, and i am not ordering 5kg of the stuff to get it delivered. rifle is a 1/9 rem vtr Link to comment Share on other sites More sharing options...
leadpig Posted August 23, 2014 Author Report Share Posted August 23, 2014 nope but due to my location beggars cant be choosers managed to get 200 a-max and a friend said he would do me a good deal on the powder as he bought to much lol. ideally i wanted n133, but only one guy over here stocks powder and he does not have any, and i am not ordering 5kg of the stuff to get it delivered. rifle is a 1/9 rem vtr Well , used that cal and bullet but never that powder brand , have you actually tryed this combo yet? I could run QuikLoad with your col and powder charge to see if its safe / slow /pressure etc . Cheers tim oooh thanks,did not see that offer no idea yet it is a new gun Link to comment Share on other sites More sharing options...
leadpig Posted August 23, 2014 Author Report Share Posted August 23, 2014 nope but due to my location beggars cant be choosers managed to get 200 a-max and a friend said he would do me a good deal on the powder as he bought to much lol. ideally i wanted n133, but only one guy over here stocks powder and he does not have any, and i am not ordering 5kg of the stuff to get it delivered. rifle is a 1/9 rem vtr Well , used that cal and bullet but never that powder brand , have you actually tryed this combo yet? I could run QuikLoad with your col and powder charge to see if its safe / slow /pressure etc . Cheers tim oooh thanks,did not see that offer no idea yet it is a new gun Link to comment Share on other sites More sharing options...
247sniper Posted August 23, 2014 Report Share Posted August 23, 2014 Have a look on reloaders nest, there are quite a few loads on there with R10x , with bullet weights between 50 - 55 grains as well. Link to comment Share on other sites More sharing options...
gunnery Posted August 23, 2014 Report Share Posted August 23, 2014 BLC-2 is a good powder for 223 with that weight of bullet Link to comment Share on other sites More sharing options...
247sniper Posted August 24, 2014 Report Share Posted August 24, 2014 BLC-2 is a good powder for 223 with that weight of bullet If its hard to get N133 over here Ie on the boat etc, im sure BLC-2 will be just as difficult ! lol Link to comment Share on other sites More sharing options...
henryo Posted August 25, 2014 Report Share Posted August 25, 2014 Cartridge : .223 Rem.Bullet : .224, 52, Hornady A-MAX 22492Cartridge O.A.L. L6: 2.260 inch or 57.40 mmBarrel Length : 24.0 inch or 609.6 mmPowder : Alliant Reloder-10xPredicted data by increasing and decreasing the given charge,incremented in steps of 0.885% of nominal charge.CAUTION: Figures exceed maximum and minimum recommended loads !Step Fill. Charge Vel. Energy Pmax Pmuz Prop.Burnt B_Time % % Grains fps ft.lbs psi psi % ms-08.8 91 20.60 3043 1069 39611 6141 98.0 1.116-08.0 92 20.80 3069 1088 40726 6187 98.3 1.103-07.1 93 21.00 3096 1107 41873 6230 98.5 1.089-06.2 94 21.20 3122 1126 43051 6271 98.8 1.076-05.3 95 21.40 3148 1145 44262 6311 99.0 1.063-04.4 96 21.60 3174 1164 45507 6348 99.1 1.050-03.5 97 21.80 3200 1183 46786 6384 99.3 1.038-02.7 98 22.00 3226 1202 48101 6417 99.5 1.025-01.8 98 22.20 3252 1221 49453 6449 99.6 1.013-00.9 99 22.40 3278 1241 50842 6478 99.7 1.002+00.0 100 22.60 3303 1260 52271 6505 99.8 0.990+00.9 101 22.80 3329 1279 53740 6531 99.9 0.978 ! Near Maximum !+01.8 102 23.00 3354 1299 55251 6554 99.9 0.967 ! Near Maximum !+02.7 103 23.20 3379 1318 56805 6575 100.0 0.956 ! Near Maximum !+03.5 104 23.40 3404 1338 58404 6593 100.0 0.945 ! Near Maximum !+04.4 105 23.60 3429 1358 60048 6610 100.0 0.934 ! Near Maximum ! As it's a remington it's likely to have a long chamber and throat. If you can measure the H20 capacity on a fireformed case and the length to the lands that will improve the estimation. Also .223 max pressure is about ~55kPsi, this sim is up to 5.56 pressures Link to comment Share on other sites More sharing options...
(200x135).jpg.0fd0a94f065c6cb243fdff1b40e0819a.jpg)
.jpg.0972b4e2bdf0b5a4109eb96f2b1b62ad.jpg)
Recommended Posts
Archived
This topic is now archived and is closed to further replies.