Midlander308 Posted June 25, 2014 Report Share Posted June 25, 2014 Anyone ever fitted a Picatinny / Weaver rail to a BRNO Mod 2 ,.22lr , the dovetail slots seem wider than the later models ,any ideas? Ta Link to comment Share on other sites More sharing options...
1in9 Posted July 4, 2014 Report Share Posted July 4, 2014 Anyone ever fitted a Picatinny / Weaver rail to a BRNO Mod 2 ,.22lr , the dovetail slots seem wider than the later models ,any ideas? Ta Depending on whether it was US market or Euro destined they are either US 3/8 of an inch or Euro 11mm, the 3/8 is the base measurement so actually closer to 13mm on top. I would recommend rails from US machinist hotrod9mm who does both sizes, email him at username@yahoo.com about £45 delivered inc tax etc. Link to comment Share on other sites More sharing options...
fizzbangwhallop Posted July 4, 2014 Report Share Posted July 4, 2014 I think Kinneysshootingsupplies.com do DIP rails for these...and post to the UK whereas DIP don't. http://www.diproductsinc.com/default.aspx?PAGE=Main%20Page I've got a DIP Products one for my Finnfire from them earlier this year but for some reason my mac, tablets won't load up the kinneys website..... which could possibly be down to virgin media!!?? Neither Safari or Firefox could find the server. There was a recent thread on stalking directory on which I posted the link to Kinneys and I believe bits were ordered successfully on there. Just really annoying I can't get on it. Got an EGW pic rail from them at the same time too. Cheers Fizz Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.