Jump to content

Where can I get TRG spares in the uk?


Herbert2007

Recommended Posts

As Tiff says, it's easy to make a spacer of any thickness. I used some 15mm plywood and painted it. Use the cheek piece as a template. Mark it out and cut to shape with a jig-saw. Then cut out the necessary holes. All you need in addition to the spacer is longer Allen bolts and they are easy to source.

Don't bother with the genuine item. When I last checked they were £43 each! A right rip off.

Link to comment
Share on other sites

As Tiff says, it's easy to make a spacer of any thickness. I used some 15mm plywood and painted it. Use the cheek piece as a template. Mark it out and cut to shape with a jig-saw. Then cut out the necessary holes. All you need in addition to the spacer is longer Allen bolts and they are easy to source.

Don't bother with the genuine item. When I last checked they were £43 each! A right rip off.

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use and Privacy Policy