jonathan.308 Posted November 18, 2013 Report Share Posted November 18, 2013 Does anybody know the tedon length of a bat M Action. Cheers Jonathan Link to comment Share on other sites More sharing options...
dasherman Posted November 18, 2013 Report Share Posted November 18, 2013 Last one I did was 1.058" with the go gauge sticking out 0.030" and a 25deg cone. Best measure it though as I've found they are not all identical. Link to comment Share on other sites More sharing options...
jonathan.308 Posted November 18, 2013 Author Report Share Posted November 18, 2013 Thank you. Cheers jonathan Link to comment Share on other sites More sharing options...
The Gun Pimp Posted November 18, 2013 Report Share Posted November 18, 2013 Jonathan - Sorry - I promised to e-mail you didn't I. OK BAT M tenon length: 1.065 inches. Diameter: 1.124 inches Thread: 16 tpi Cone: 25 degrees I'm assuming you have a new action - some of the early BATs can vary Vince Link to comment Share on other sites More sharing options...
jonathan.308 Posted November 18, 2013 Author Report Share Posted November 18, 2013 Hi Vince Yes it's a new Bat M just got it today. I come up with the same Specifications so that's good, cheers. Just need to find stock now, hope its easier than it was for the small Bat action. See you satday. Cheers Jonathan. Link to comment Share on other sites More sharing options...
The Gun Pimp Posted November 18, 2013 Report Share Posted November 18, 2013 Jonathan, We are fortunate to have a great UK stockmaker - the Joe West laminate stocks are superb. They do some great long-range benchrest stocks which also come fully inletted ready for Devcon bedding and lacquered if you prefer. Dorg - who posts on this Forum will point you in the right direction. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.