Swarovski1 Posted June 4, 2013 Report Share Posted June 4, 2013 Hi all.i set the die up as usual.ram up.tighen seater down to touch shell holder then back out one full rotation.wind nut down the tighten grub screw.my prob is loading up my ammo ive ham to wind seating stem screw down to its limit.the only thing i can think it is its the wrong seating stem.any thoughts please Link to comment Share on other sites More sharing options...
1967spud Posted June 4, 2013 Report Share Posted June 4, 2013 put your die down till it kisses the top of the shell holder then drop the ram and wind the die in further by 1/8 th of a turn more, you should be good to go then Link to comment Share on other sites More sharing options...
Swarovski1 Posted June 4, 2013 Author Report Share Posted June 4, 2013 Ok spud fanx.what would be the reason why this like this not doing it the standard way.could you explain Link to comment Share on other sites More sharing options...
NICK Posted June 4, 2013 Report Share Posted June 4, 2013 Is your seating die one that applies a crimp? If it is i put a case in the shell holder and put the ram to the top of its stroke, i tighten the die down untill i feel it touch the case and then back it away half a turn. Have you another 06 Case based seating stem you can compare your 6.5 to perhaps? Nick Link to comment Share on other sites More sharing options...
Swarovski1 Posted June 6, 2013 Author Report Share Posted June 6, 2013 My mate got redding dies,we are going to try his 260 stem,we have already tried inserting the same bullet we both had and marking it with a pencil and measure,mine was 70 fow shorter,I think spud is thinking of fl sizer not the seating die Link to comment Share on other sites More sharing options...
.jpg.0972b4e2bdf0b5a4109eb96f2b1b62ad.jpg)
(200x135).jpg.0fd0a94f065c6cb243fdff1b40e0819a.jpg)
Recommended Posts
Archived
This topic is now archived and is closed to further replies.