dannywayoflife Posted May 17, 2013 Report Share Posted May 17, 2013 I've heard about people sorting bullets by length how do you do this? Also how do I measure col to the ogive rather than to the tip? My reloading is going pretty well. I spent 2 hrs yesterday at Carlton Moor and developed a load in my 223 Tikka T3 that's around .25 moa with 23 fps ES. Only down side is that it was fairly slow at 2660 fps but with that kind of accuracy and low ES I don't want to mess too much! My loads for my 6.5x55 with elco17 didn't go well. I ran into serious pressure signs at 41.6grains under a 123 Amax. That's only .6gr over the load data I got from the alliant site. I think it's too fast for the sweede. Got loads of loaded rounds to pull now! Thanks for the knowledge guys. Link to comment Share on other sites More sharing options...
1967spud Posted May 17, 2013 Report Share Posted May 17, 2013 Link to comment Share on other sites More sharing options...
1967spud Posted May 17, 2013 Report Share Posted May 17, 2013 speak to either davey or me on here and well sort you out with a tool Link to comment Share on other sites More sharing options...
jcampbellsmith Posted May 17, 2013 Report Share Posted May 17, 2013 http://www.sinclairintl.com/reloading-equipment/measuring-tools/bullet-comparator-inserts/sinclair-bullet-sorting-stand-prod38769.aspx is one option if you want to sort lots of bullets quickly. Regards JCS Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.