bbob Posted December 16, 2012 Report Share Posted December 16, 2012 Going to form some Lapua cases this week using a redding F/L sizing die do I trim to length and chamfer cases first or run the cases through the die before trimming them Link to comment Share on other sites More sharing options...
Elwood Posted December 16, 2012 Report Share Posted December 16, 2012 Run them through the die first. Link to comment Share on other sites More sharing options...
bbob Posted December 16, 2012 Author Report Share Posted December 16, 2012 Cheers Ian Link to comment Share on other sites More sharing options...
1967spud Posted December 16, 2012 Report Share Posted December 16, 2012 probably best to run them through the die then fire form them and then trim them staurt Link to comment Share on other sites More sharing options...
bbob Posted December 17, 2012 Author Report Share Posted December 17, 2012 Cases will need trimmed before firing as the chamber was cut with reamer measuring 1.543 with no turn neck just unsure about trimming to length before or after F/L sizing them Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.