shooter79 Posted December 3, 2012 Report Share Posted December 3, 2012 Evening all, I've never brought one of these before so just after some advice really. Looking to lock down my Spuhr mount on a pic rail. Hakan at Spuhr has suggested the torque settings of - Base screws 45in/lbs and ring screws 15in/lbs. Some of the prices stated seem very high indeed, is there a screwdriver out there i can pick up locally to cover those settings? Any thoughts then please share. Regards Carl Link to comment Share on other sites More sharing options...
1967spud Posted December 3, 2012 Report Share Posted December 3, 2012 get a fat wrench they are nice to use Link to comment Share on other sites More sharing options...
Barrelsniffer Posted December 4, 2012 Report Share Posted December 4, 2012 I use or have 2 one being the Wheeler Engineering FAT (Firearm Accurizing Torque) Torque Wrench Screwdriver from midway UK And the other being Borka Tools Torque Driver 15-72 inch pounds which can be bought from Mike Norris at Brock and norris Link to comment Share on other sites More sharing options...
bbob Posted December 4, 2012 Report Share Posted December 4, 2012 Evening all, I've never brought one of these before so just after some advice really. Looking to lock down my Spuhr mount on a pic rail. Hakan at Spuhr has suggested the torque settings of - Base screws 45in/lbs and ring screws 15in/lbs. Some of the prices stated seem very high indeed, is there a screwdriver out there i can pick up locally to cover those settings? Any thoughts then please share. Regards Carl JETCO electronic torque wrench I picked one of these up on eBay can be set from 7 to 75 in.-lb. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.