Devil_bri Posted August 4, 2011 Report Share Posted August 4, 2011 Can anyone give me details of a good load for Hornady 150gr interlock boat tail soft point ? I will be using Varget I have a reloading book that gives max as 44.5gr but I have read on line the max can be up to 47.5 !!! Hogdon web site does not list this bullet ! Will be used for deer out of an AI AW 26" barrel .308 Many thanks Link to comment Share on other sites More sharing options...
Chris-NZ Posted August 5, 2011 Report Share Posted August 5, 2011 As long as you're not jamming into the throat, I'd start at 44 and move towards 46 in half grain increments. If you're not shooting further than 300yds, any load in this region will be quite adequate Chris-NZ Link to comment Share on other sites More sharing options...
Devil_bri Posted August 6, 2011 Author Report Share Posted August 6, 2011 Thanks chris Link to comment Share on other sites More sharing options...
Scotch_egg Posted August 7, 2011 Report Share Posted August 7, 2011 I just came third in the Precision Sharp and Snap Shooting Match using 44.7grn varget under a 155grn 2155 SMK. In reality you have to play. Give it .3 steps up to 46grns from 44grn and you won't go far wrong. ATB Dave Link to comment Share on other sites More sharing options...
(200x135).jpg.0fd0a94f065c6cb243fdff1b40e0819a.jpg)
.jpg.0972b4e2bdf0b5a4109eb96f2b1b62ad.jpg)
Recommended Posts
Archived
This topic is now archived and is closed to further replies.