SRGNXL Posted July 10, 2011 Report Share Posted July 10, 2011 hello all, Relatively new over here. In order to speed up my hand loading particularly the hand weighed charges, I got the target master trickler from Allan. The thing is fairly easy to setup if you follow the instructions that come with it. I am using a vintage Ohaus 10-0-05 tuned by Scott Parker from 6mmbr.It is very accurate if used properly and upto 2 kernel sensitive if you remove the pan and place it again. Anyway, I setup a magnifying glass on my neco gauge as continuous use of the scales becomes tiring. Setup the trickler as indicated and after the first 4 trials to get the sensor to cut off supply at the correct timing, it trickled the charges wonderfully.i only topped up 2 out of 15 loads as they were about 3 kernels out. I did setup the trickler slightly inclined upwards, it's abit slower but more accurate. I'm not even using a powder measure, just machined a 'spoon' from aluminium which holds close to 46 grains and trickle the rest. Link to comment Share on other sites More sharing options...
John MH Posted July 10, 2011 Report Share Posted July 10, 2011 I love mine as well, I use a WebCam to magnify the scale pointer on mine. Link to comment Share on other sites More sharing options...
camo304 Posted July 17, 2011 Report Share Posted July 17, 2011 +1 for me very good bit of kit Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.