Nelly Posted July 4, 2011 Report Share Posted July 4, 2011 Hello All. New to this forum and reloading. I have read through posts and there's great info here. I'm looking for a full length sizing die. Any brands to avoid ? All brands pretty much the same ? I don't mind shelling out for good kit if necessary. All suggestions welcome and thanks for any help, Nelly Link to comment Share on other sites More sharing options...
Davy Posted July 4, 2011 Report Share Posted July 4, 2011 Really it is down to what you would care to spend, Redding are very good as are Forster and I still use a Lee for ,308 occasionally, I think it was around GBP13 when I got mine. It is down to personal preference and the cartridge you are working with. Welcome to the forum Link to comment Share on other sites More sharing options...
SteveW Posted July 4, 2011 Report Share Posted July 4, 2011 Welcome Nelly, Great advise from Davy, what calibre/s are you planning to load for?? Maybe worth a post in the "Wanted" section. You will read/hear good and bad about all manufacturers, the dies are only one small part in the reloading jigsaw. ATB Steve Link to comment Share on other sites More sharing options...
Nelly Posted July 4, 2011 Author Report Share Posted July 4, 2011 Thanks for the answers and the welcomes. I'll be loading for .308 Win. and I've got a Comp Seating Die and a Neck Sizing die both RCBS. I've read a few good comments about Forster and Redding, most likely be one of those. I'll have a look at the Imperial meeting this weekend. Thanks again fellas,Nelly. Link to comment Share on other sites More sharing options...
(200x135).jpg.0fd0a94f065c6cb243fdff1b40e0819a.jpg)
.jpg.0972b4e2bdf0b5a4109eb96f2b1b62ad.jpg)
Recommended Posts
Archived
This topic is now archived and is closed to further replies.