Elwood Posted April 8, 2011 Report Share Posted April 8, 2011 http://www.accurateshooter.com/featured/neck-turning-lathe-from-21st-century/ Link to comment Share on other sites More sharing options...
6mmBR Posted April 8, 2011 Report Share Posted April 8, 2011 Simple but very effective, I expect with a bit of thought you could make one from a case trimmer. Cheers Dave Link to comment Share on other sites More sharing options...
TonyH Posted April 8, 2011 Report Share Posted April 8, 2011 I saw that on the 6mmBR.com news - very impressive item. This 21stC outfit produces some very classy, clever designs, not too expensive either - at least in the USA..... Tony Link to comment Share on other sites More sharing options...
Ronin Posted April 8, 2011 Report Share Posted April 8, 2011 I do all mine on the lathe anyway, just a wee bit bigger than that one...... Link to comment Share on other sites More sharing options...
Elwood Posted April 8, 2011 Author Report Share Posted April 8, 2011 I still have sleepless nights thinking about the 10 thou overall diameter I had to hand turn on the RWS brass. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.