stephentri

Hi Richard 

Thanks looks like i will go with a average BC between 0.331 and  0.319

Yes I have updated it if you look at my screen shot you will see 6 different BC for the 140g eldm for the Kestrel all from the applied ballistic link ,I was looking to know what one to use, your thoughts please.

On the box hornady give a BC of 0.326 the non personalized BC is 0.291 given by kestrel link ballistics going by this and real data the BC is to low has any one else found this.

Hi looking at the bullet library up loaded for my kestrel 5700 it shows 6 different options for 140g eld-m what BC are yous using in your kestrel 

Anyone ?

Hi

Have any off you compared G7 to custom curve on your real shooting data

Hi 

Looking at kestrel 5700 ballistic vs 5700 applied ballistics, apart from not storing as many guns and not having drop scale factor which really only matters when shooting at transonic ranges,the main differences is custom curves,is it worth spending the extra money to get custom curves,how much better is it than G7 BC shooting out to 1000y any real world information would be grateful.

Thanks 

Using sea clean and hot water 2, 15min cycles has mine clean 

https://www.blackrifle.co.uk/MDT-AR15-Pistol-Grip-p/mdt-grip.htm

I have this one on my ESS 

Hi 

I have noticed that when I clean brass with the ultrasonic cleaner the inside of the necks almost appear rough, do any of you polish the inside after cleaning, is there any benefit in doing.

Thanks 

Stephen 

I have a Mdt ess can't fault it, easy to get behind,the biggest difference I noticed when I changed from a traditional style stock  was the way the rifle recoiled back in a straight line with no muzzle rise.

Pm send

Pm send 

Anyone got advice on this 

Hi out of the 3 powders which one would you recommend for 150 to 178 grain bullet for a 3006, 24 inch barrel,I know all 3 will work but looking to keep to one powder,
Thanks

https://www.blackrifle.co.uk/MDT-Long-Action-AICS-Metal-Magazine-p/mdt-mag-la.htm

3 hours ago, Ronin said:

No 

 

your stuck with short action and aics I’m afraid the t3 port isn’t long enough (underneath) to accommodate the long aics mag without some considerable modification that make the action long only 

 

It’s a pity that no one makes a chassis to take long action TIkka mags for the T3

I have a MDT ess chassis with my tikka t3 6.5x55 it takes mdt steel mags for 6.5x55 up to 300 win mag .

One of these from teir one, hope this helps 

Nothing wrong with the 6.5×55 

Cz have had one for years , good rifle 

I bump the shoulder back every time with a Redding body die then neck size with a lee collet die I have found this method has less run out than using the redding full length bushing die. 

56 minutes ago, Chanonry said:

Don't throw the Collet die in the bin !

Buy a Redding Body Die to FL resize every time and use the Collet Die for the neck. Excellent set up for a fraction of the cost.

and avoids those damn expander balls

+1

Hi I am using cfe 223  in my .223   77gr tmk  getting good results 

With my kahles k624i  I can see . 223 holes on white paper at 300 y .what rifle scope are you using?