rsc1960

burger Pete.

I would have loved these,

regards

bob.

Crossed wires Bob....nowt wrong with what you've done but it was the fittings you've used that I need to source. I have the same pipe which I can use, but the CGA600 fittings or ready made hose connector is what I'm looking for (hence the comment) and haven't found any locally yet.

this is what i have used,

gosystems fine flame nozzle, £19 from B and Q, cut it, ruffed up the outside of the brass pipe, then sone sealer then the hose and pipe, all in all it took me about 20 minutes to do and the results are fine,

regards

bob.

I was looking to do something similar Bob so thanks for that tip. I'd prefer to use the proper fittings if I can find them though.

you are welcome,

i would love to have top spec hose to see what the difference would be, but the machine works perfectly

bob

I used some small bore hose from a gas barbeque fitting that we had in the garage,

works fine, but when you turn the gas of at the end of the session it takes a wee bit of time to run out due to the pressuered tube.

sorry I don't have a better picture of it

bob.

well done bud.

I have done around 700 cases since I got mine,

20 tac

6br

243

308

223

all done in no time at all.

Bob

got mine the other day and have been so happy,

Ludo you do a cracking bit of kit.

thank you and ill post pictures soon with my modification I have done to get the gas bottle fitted better than laying it on the bench

regards and thanks again

bob.

mine has just arrived, unpacked it and well impressed, great quality and service,

take it for me lads this is a very nice bit of kit,

thank you Ludo for a great service and a very nice bit of equipment that ill set up later tonight ready for the 20 tac and 6mmbr cases.

kindest regards

bob.

thanks so much

it should be here today.

thank you RC

bob.

Many thanks to Binnzy for his various posts on this topic, most helpful.

 

Time for the DW loading bench to get a new gizmo.

get one ordered. I cant wait to set mine up.

bob.

Ludo

funds sent @ 0900 this morning

thank you

bob.

Hi Bob

 

You can get Tempilaq from Mark Ellis - aka Spud1967 Reloading (amongst other places, but I would rather support one of our community):

 

http://www.1967spud.com/shop/tempilaq/tempilaq/

 

I recommmend getting the 750F Tempilaq

 

One bottle will last you a very, very long time.

 

Once I have set up my annealer using a few spare cases to get the timing correct; starting with a little orange flame generation then backing off the timing so that the case moves before the orange flame starts (as described above). then I will put one case through with tempilaq on the inside of the neck to ensure it gets up to temperature. So...I only use tempilaq on 1 case per annealing session.

 

I find it easier to tempilaq a few cases ahead of time and store them with the annealer, as it takes a while to dry and I want to 'get on with it' once I get the annealer out.

 

Paul

cheers Paul

very kind, I'll drop mark a PM when I am ready, and yet again thank you for your help and advice,

bob

oops

thank you,

this is the very same torch I have,

now we need a video of the prep done before you crack n,

where is the best place to get the tempilaq

bon

Could you send me your details for the sum of £200.

one machine and 2 discs,223and 6mmbr,(243)

thank you

Bob.

also very interested,

cash waiting,

would be up for 20 tac (223) case and 6mm br (243) case disc,

would also like to know where you are based

thanks

Bob.

if factory ammo.

6mmbr

if reloading.

20 tac

both stunning IMO:

bob