Ronin Posted March 10, 2018 Report Share Posted March 10, 2018 Tactical / Range gun / Heavy barrelled stalker built on a Weatherby Vanguard action (Same as Howa 1500) The Vanguard action features flat bottomed base and integral recoil lug, benefits from M16 style extractor, fluted bolt and a two stage trigger. The action has had the lugs lapped, but required no further "accurizing work" I fitted a R4 profile (Remington PSS) Border Archer barrel I had in stock (pre Sassen) and finished it to 22" with a M18x1mm thread and knurled protective cap. The action was devcon bedded into a PSE Hunter carbon fibre stock and Atlasworxs bottom metal using AICS 5 round Mag A Contessa steel picatinny rail is fixed to the action. The stock has been recoated with Magpul OD Cerakote The action coated in satin black cerakote The trigger breaks at a crisp 2.5 lbs. I took the rifle to the range prior to the snow hitting us and using a PM 11 10x42 on top and old ammunition made for another rifle (103grain GS Custom bullets, shot the target below) The rifle is for sale in classifieds. Link to comment Share on other sites More sharing options...
Treedave Posted March 10, 2018 Report Share Posted March 10, 2018 Looks nice, shoots better, especially for ammo not tuned for it. Not sure about the faux rug mind. Link to comment Share on other sites More sharing options...
meles meles Posted March 10, 2018 Report Share Posted March 10, 2018 Excellent work, as ever... Out of curiosity, why would the lugs require lapping? Just to smooth the locking action? Link to comment Share on other sites More sharing options...
Ronin Posted March 12, 2018 Author Report Share Posted March 12, 2018 The lugs had full contact one side and 70% the other so I chose to lap them to provide more even contact both sides. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.