sauer Posted September 5, 2010 Report Share Posted September 5, 2010 guys i have a hertel & reuss spotting scope its nice i like it , problem is ....its really reasonable condition but what a bugger to pull it open its as stiff as hell to get fully open any advice or tips to "ease" the drawing of the scope cheers sauer / paul Link to comment Share on other sites More sharing options...
eldon Posted September 6, 2010 Report Share Posted September 6, 2010 I would try some dry lubricant on the outside of the tube where the seals slide. Something like silicone spray would be good but you could also try probably without expense some furniture polish as you no doubt will have some of that knocking about. Just keep your lenses covered till you have finished applying any sprays. Link to comment Share on other sites More sharing options...
sauer Posted September 9, 2010 Author Report Share Posted September 9, 2010 thought bout trying spray case lube but thought id wait see if i get a reply from hertel & reuss. they said not to spray any liquid as it would migrate to interior and the lenses. suggested vaseline so will see how it goes sauer Link to comment Share on other sites More sharing options...
baldie Posted September 10, 2010 Report Share Posted September 10, 2010 I wouldn,t use vaseline. it will attract debris. What about a spray on PTFE ? I have a can here made by pennine lubricants, it dries "dry" but bugger, is it slippery. Link to comment Share on other sites More sharing options...
sauer Posted September 11, 2010 Author Report Share Posted September 11, 2010 mmmmm sounds better baldie, ill have to have a look for that online cheers sauer Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.