Tikka Posted August 17, 2007 Report Share Posted August 17, 2007 I always tend to full length re-size my cases for hunting. Having just done a batch of .270 cases I noticed that the actual re-size stops short approximately 1/8" from the bottom of the case. I have the RCBS dies set up as per the instructions as far as I can see. Is this 1/8" normal or am I missing something here? Link to comment Share on other sites More sharing options...
stag1933 Posted August 17, 2007 Report Share Posted August 17, 2007 Hi. If you have no problem chambering the cases leave it as it is. You will not be working the brass quite as much at that setting. Link to comment Share on other sites More sharing options...
.jpg.0972b4e2bdf0b5a4109eb96f2b1b62ad.jpg)
(200x135).jpg.0fd0a94f065c6cb243fdff1b40e0819a.jpg)
Recommended Posts
Archived
This topic is now archived and is closed to further replies.