mousegunner-uk Posted July 22, 2023 Report Share Posted July 22, 2023 I have a large quantity of Primetake Omega Sniper .338 LM factory ammunition, loaded with the 300g Sierra HPBT bullet (#9300) to a length of 3.630”. They have been hermetically sealed around the primer and bullet/case mouth with B.S approved sealant. They were loaded to be used in the AWSM. I have shot these over a chronograph and obtained the following information for 5 rounds out of my AWSM with a 27”barrel. 816.4m/s, 816.7m/s, 813.6m/s, 807.3m/s, 820.1m/s. Note chrono was 2M from muzzle, tested on a sunny day with 24C temperature. Average velocity is 814.82m/s (Factory stated velocity is 808m/s) SD of 4.79 They are packaged loose in 100 quantities £365/100, £720/200 or £1050/300 Can be delivered on M6 & M40 corridor or collected from North West Cumbrian or Bisley. You must have .338 on your FAC. Quote Link to comment Share on other sites More sharing options...
mousegunner-uk Posted August 29, 2023 Author Report Share Posted August 29, 2023 bump Quote Link to comment Share on other sites More sharing options...
mousegunner-uk Posted October 4, 2023 Author Report Share Posted October 4, 2023 bump Quote Link to comment Share on other sites More sharing options...
OSOK Posted October 4, 2023 Report Share Posted October 4, 2023 This is quality ammunition ... I've shot hundreds of rounds of this for Steelcore and i've found 830 m / sec or 2,730 ft / sec out of the 27 inch Cyclone barrels .... I'm sure it's Peterson brass as well ! Good luck with your sale OSOK Quote Link to comment Share on other sites More sharing options...
mousegunner-uk Posted October 27, 2023 Author Report Share Posted October 27, 2023 Bump Quote Link to comment Share on other sites More sharing options...
mousegunner-uk Posted November 10, 2023 Author Report Share Posted November 10, 2023 Bump Quote Link to comment Share on other sites More sharing options...
mousegunner-uk Posted January 4 Author Report Share Posted January 4 Bump Quote Link to comment Share on other sites More sharing options...
mousegunner-uk Posted January 23 Author Report Share Posted January 23 bump Quote Link to comment Share on other sites More sharing options...
mousegunner-uk Posted March 13 Author Report Share Posted March 13 bump Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.