sam f Posted April 13, 2009 Report Share Posted April 13, 2009 If that bore has not been cleaned in 220 rounds it will need a good soak in Wipeout to get the carbon and copper out. I Maybe start a new thread on the best way to get that much crap out of the bore. A As Alydion's comment above- your chosen method please Link to comment Share on other sites More sharing options...
1967spud Posted April 13, 2009 Report Share Posted April 13, 2009 forrest bore foam over night then a good scrub in the morning that would my prefered method for a barrel with no cleaning recently mark Link to comment Share on other sites More sharing options...
craigyboy Posted April 13, 2009 Report Share Posted April 13, 2009 Mpro 7 for the carbon and Montana extreme 50bmg for the cooper, also don't be afraid to get stuck in with brushes to give it a good scrub. Link to comment Share on other sites More sharing options...
Alycidon Posted April 13, 2009 Report Share Posted April 13, 2009 AS previously posted/, Wipeout here you go, this looks a better supply line than those I posted earlier http://www.oksmoke.co.uk/painless.html Get some accelerator as well. Use a bore guide, cover the stock with a decent bag, , squirt it in from the muzzel end, leave to soak for an hour or so them patch out and repeat. I would be tempted to leave it in overnight but you might want to check with others here or on the US sites such as 6BR or Saubier as I have never used the accelerator. I would personally be wary of Phospher bronze brushes but use chemicals to free the crap then bristle brushes to get it out. A Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.