Fx impact .22 fac

[Aggy]

The gun is a mk1  impact  it has been quite heavily upgraded 

the barrel is the new stx system it has a 700 mm stx superior liner that has been carbon fibre sleeved in place or the original o rings ,there is stil an original at each end of the carbon tube 
the original plenum valve hammer ect have been replaced with the power plenum ,basically more shots or more power for the same air .

the rear plates top plate Picatinni rail shroud and mod have all been cerakoted.

mk 2 magazine plate 

it has a slug power kit fitted and has .22 .25. And .30 sleeves for it 

prs arca / Picatinni rail 

two .22 mags 

the gun will fire pellets at supersonic speed if you really want to 18 grain jsb at 1153 fps , 

£900 ,this to be fair is a steal given the cost of the gun and parts that have gone into it 

IF you really want to make an impact 🙂I also have a .30 cal barrel system ,superior heavy liner ,outer ,shroud and mod c/w magazine ,without retuning the gun this will still lob .30 pellets at just short of 1000 fps and about 90 ftlb if you up the reg and tune to suit it will go over 100 ftlb and really does wallop things .

£250 for this 

obviously  this is a fac rifle so the normal rules apply.

I might be open to px deals depending what you have 

 

[Aggy]

Couple of questions but no firm offers yet 

[Aggy]

Garyw replied to your pm ,Is your inbox full ? 

[Aggy]

Withdrawn Still available £

[Aggy]

Withdrawn from sale