Used 7mm-08 Lothar barrel

[Ronin]

Returning customer has offered for sale a used Lothar Walther barrel I fitted two years ago that has done approximately 500 rounds and far from worn out 

Taken off a Rem 700  that was previously trued and blueprinted - the tenon dia is 1.075” x16 tpi 

It would turn down to 1.062” diameter and pick up the thread to standard Remington dimension or suit smaller tenoned action such as Sako / Tikka with appropriate machining 

The barrel is threaded M18x1 at the muzzle  (no cap) and approx 20” long, med palma profile 

 

This is licensed part as it’s chambered in 7mm-08 (SAAMI spec ) so will only be sent to another RFD

 

£200 plus postage cost ono