Adamdavi3s Posted May 10, 2020 Report Share Posted May 10, 2020 Hi All, I have a S1 hatsan and would like to drop the barrel from a 28 to 24” which is technically a very simple change. However would this mean it needed to be re-proofed? I’m not clued up on such matters many thanks Adam Quote Link to comment Share on other sites More sharing options...
Akeld Posted May 10, 2020 Report Share Posted May 10, 2020 If you're swapping to another barrel no, if you're chopping 4" off your existing I'd also say no as you're shortening as opposed to removing material Quote Link to comment Share on other sites More sharing options...
Adamdavi3s Posted May 10, 2020 Author Report Share Posted May 10, 2020 Sorry yes that is a bit ambiguous, a straight swap of factory barrels Quote Link to comment Share on other sites More sharing options...
miki Posted May 10, 2020 Report Share Posted May 10, 2020 The barrel you are swapping will be proofed, on a shotgun there is no other 'proofed' part. Just the barrels (which encompass the chambers). (I know the pic isn't a Hatsan, but couldn't find one ...) Quote Link to comment Share on other sites More sharing options...
Adamdavi3s Posted May 10, 2020 Author Report Share Posted May 10, 2020 Thanks chaps, just wasn’t sure if the S1 nature had any impact. Quote Link to comment Share on other sites More sharing options...
.jpg.0972b4e2bdf0b5a4109eb96f2b1b62ad.jpg)
(200x135).jpg.0fd0a94f065c6cb243fdff1b40e0819a.jpg)
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.