devilishdave Posted January 28, 2009 Report Share Posted January 28, 2009 I am looking at rebarreling my remington 700 in the next few months with a Border Archer .243 AI. I will put the rifle in during march just before I go over seas for a few months. My question is this what loads are you using in this cal and what performance Accuracy/velocity do you get with them? Regards Dave Link to comment Share on other sites More sharing options...
mildot Posted January 28, 2009 Report Share Posted January 28, 2009 During fireforming i used 43gr of imr4350 and 87gr vmax @2940fps after fireforming 44.5gr IMR4350 87gr vmax @3100fps This is out a 20.5" sako barrel. Link to comment Share on other sites More sharing options...
1967spud Posted January 28, 2009 Report Share Posted January 28, 2009 40g of varget over a 80g nosler 3350 fps or you can go up to 48 g of h4381sc over a 87 g v max havbent done the chrony bit yet, but will report back Link to comment Share on other sites More sharing options...
dogfox1 Posted February 7, 2009 Report Share Posted February 7, 2009 40g of varget over a 80g nosler 3350 fps or you can go up to 48 g of h4381sc over a 87 g v max havbent done the chrony bit yet, but will report back Hi, There is a lot of useful information on this site but be careful. http://www.angelfire.com/nd/243ackleyimproved/ I found it very useful Dogfox1 Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.