Chris Hassell Posted December 15, 2019 Report Share Posted December 15, 2019 has anyone used vit.n150 for .303 british? I now they recommend n140 but I've a bucket of 150 Quote Link to comment Share on other sites More sharing options...
terryh Posted December 16, 2019 Report Share Posted December 16, 2019 Chris, Have only ever used N150 in the 303 with pretty good success, 41.5g under SMK's Assuming you are looking at the normal 173'ish grain bullets then you could give it a try, but one comment, Vit themselves only list N140 & 540 in their tables, which is probably for a good reason? But here is a basic run on QL FYI: Cartridge : .303 British Bullet : .311, 174, Sierra HPBT MatchK 2315 Useable Case Capaci: 49.522 grain H2O = 3.215 cm³ Cartridge O.A.L. L6: 3.075 inch = 78.11 mm Barrel Length : 27.0 inch = 685.8 mm Powder : Vihtavuori N150 *C Predicted data by increasing and decreasing the given charge, incremented in steps of 2.0% of nominal charge. CAUTION: Figures exceed maximum and minimum recommended loads ! Step Fill. Charge Vel. Energy Pmax Pmuz Prop.Burnt B_Time % % Grains fps ft.lbs psi psi % ms -20.0 82 35.20 2069 1654 24061 4833 92.2 1.823 -18.0 84 36.08 2118 1733 25587 4976 93.2 1.777 -16.0 86 36.96 2166 1813 27215 5113 94.2 1.731 -14.0 88 37.84 2215 1895 28950 5246 95.1 1.688 -12.0 90 38.72 2263 1979 30802 5372 96.0 1.645 -10.0 92 39.60 2312 2064 32779 5493 96.7 1.603 -08.0 94 40.48 2360 2151 34893 5607 97.4 1.563 -06.0 96 41.36 2408 2240 37142 5714 98.0 1.523 -04.0 98 42.24 2455 2329 39523 5814 98.5 1.481 -02.0 100 43.12 2503 2421 42048 5906 99.0 1.441 +00.0 102 44.00 2550 2513 44743 5989 99.3 1.403 +02.0 104 44.88 2598 2607 47622 6064 99.6 1.366 ! Near Maximum ! +04.0 106 45.76 2644 2702 50698 6130 99.8 1.330 ! Near Maximum ! +06.0 108 46.64 2691 2798 53990 6187 100.0 1.295 !DANGEROUS LOAD-DO NOT USE! +08.0 110 47.52 2737 2895 57515 6234 100.0 1.261 !DANGEROUS LOAD-DO NOT USE! +10.0 112 48.40 2783 2993 61294 6274 100.0 1.229 !DANGEROUS LOAD-DO NOT USE! Brgds Terry Quote Link to comment Share on other sites More sharing options...
Chris Hassell Posted December 16, 2019 Author Report Share Posted December 16, 2019 Thank you.will give that a try... Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.