25-06 load data?

[cloverleaf]

Hi, wanting to make a home load for my 25-06, using 115 grain nosler ballistic tip and vit N150 can anyone help with some start loads and maximum loads????

[6mmBR]

Have a look here

http://www.lapua.com/fileadmin/user_upload...ideJuly2008.pdf

Cheers

Dave

[cloverleaf]

Have a look here

http://www.lapua.com/fileadmin/user_upload...ideJuly2008.pdf

Cheers

Dave

thank 6mmbr, cant find a load for that bullet weight, any suggestions?

[Ronin]

thank 6mmbr, cant find a load for that bullet weight, any suggestions?

 

Cannot help with 150 series powder but I used to use 117g Interlocks under 44.9g of Vit 160 BUT found that RL15 (51g) gave better accuracy and velocity.

 

 

My own reloading manual does not show VV150, but it is very similar burn rate (slightly faster) than H4350 (which is shown), the start load for this is listed at 41.3 g max is 46.7g.

 

Ive run 46g of Vit 150 under a 115g NBT on Quickload which shows a PROJECTED, mild load and just under 3000fps - which is about spot on for the 25-06.

 

 

These loads from my rifle are safe IN MY RIFLE and may not be in yours.

 

The data from Quickload is a projection - treat that with caution

[bigun]

im useing H4831sc 55grs cci br2 100gn nosler ballistic tips [splitzer]giveing a 3007 fps.. oal 3.220..seating death 2.720..winchester cases trimed to 2.484 ..useing a remmington 700

[cloverleaf]

Thanks for your help everyone!

happy hunting