1967spud Posted October 22, 2008 Report Share Posted October 22, 2008 HAS ANY BODY EITHER USED OR GOT EXSPERIENCE OF THIS THANKS Link to comment Share on other sites More sharing options...
7X64 Posted October 24, 2008 Report Share Posted October 24, 2008 Hi Spud, I normally set up a large sheet of paper with an aiming mark on it at 100yrds, fire a shot and then with the rifle held firm (still aiming at the mark on the paper) I crank the reticle until it’s sitting over the bullet hole. Generally my next round will be very close to the original aiming mark and unlike the Accuscope it doesn’t matter if your scope is ¼ or 1/8 MOA I like to keep it simple as I find charts and things a bit too confusing. Regards Steve Link to comment Share on other sites More sharing options...
eldon Posted October 26, 2008 Report Share Posted October 26, 2008 I do the same as 7x64 except I bore sight at 50 yds and fire 2 rounds. Adjust then move back to 100 yds. Can usually do it from nowhere to zero ? in about 4 shots wind permitting. No gadgets required, its only something else to carry/ lose. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.